Setting H.323 Parameters - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Parameter
DNS server address
Network interface mode
Hub network port mode
Step 2 Save the settings.
----End

2.5.3 Setting H.323 Parameters

The H.323 parameters must be set when the GK is used in the conference system.
Prerequisites
The GK is used in the conference system.
Context
When the GK is used in the conference system, the terminal can set the site number and the site
name. Thus, remote sites can call the local site by entering the site number or the site name
instead of entering the IP address.
Issue 09 (2012-09-03)
Description
If the connection type is set to Static IP, the IP address of the
domain name service (DNS) is available to be set. After the IP
address of the DNS server is set, domain names can be used
for the GK server address and the SIP server address. The DNS
server will translate the domain names to the IP addresses of
the GK server and the SIP server.
This specifies the working mode of both the network interfaces
of the terminal.
l Auto detection: When accessing the network, the terminal
automatically communicates with the remote network
device to determine the best network mode.
l 10 Mbps and half duplex: The transmission rate is 10
Mbit/s. Data cannot be sent and received at the same time.
l 10 Mbps and full duplex: The transmission rate is 10
Mbit/s. Data can be sent and received at the same time.
l 100 Mbps and half duplex: The transmission rate is 100
Mbit/s. Data cannot be sent and received at the same time.
l 100 Mbps and full duplex: The transmission rate is 100
Mbit/s. Data can be sent and received at the same time.
TIP
If the working mode of the network interface of the remote network
device is not known, set this parameter to Auto detection. Otherwise,
the terminal may fail to access the network properly.
When operating in this mode, the terminal can function as a
hub, enabling the devices connected to its two network ports
to communicate with each other.
Enable this function to access the Integrated Services Digital
Network (ISDN) when the terminal is connected to the
IGW100.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Network
29