Tool Upgrade - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Upgrade interval
Server address
User name
Password
Step 3 Choose Save.
----End

11.2 Tool Upgrade

You can use a computer to locally upgrade the endpoint.
Prerequisites
Before the upgrade, ensure that:



Upgrading a Single endpoint
Step 1 Power on the computer and endpoint.
Step 2 Extract the compressed software upgrade package on the computer.
Step 3 Run UpgMaster.exe to display the window shown in
Issue 01 (2013-09-30)
Description
Specifies the upgrade interval. This
parameter is available only when Auto
upgrade is selected.
Specifies the IP address of the server
that stores the upgrade files for your
endpoint.
Specify the user name and password
your endpoint uses to access the server.
The target software is saved to the computer.
The computer is connected to the endpoint using a straight-through cable, crossover
cable, or switch.
You have obtained the upgrade password. The default upgrade password is Change_Me.
For details, see 7.4 Setting the Upgrade
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
The default value is 0.5
h.
Value range: 0.5 h to 24
h.
This parameter cannot
be left blank.
Example:
http://200.55.55.100/
No default value is set
for this parameter.
Password.
Figure 11-1.
11 Upgrading
122