Huawei TE40 Administrator's Manual page 112

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Display IP
address
Select
conference
controls
Display
position
Display
duration
Display time
and zone
Font color
Font size
Font Type
Bold
Set the
horizontal
offset
Set the
vertical
offset
Issue 01 (2013-09-30)
Description
operation screens except for the call and
menu screens.
If you set this parameter to any other
value, you can vaguely see the
background image on all operation
screens.
Specifies whether to display the local IP
address on the conferencing screen.
Specifies the conference control
functions you want to display on the
Conference Control screen.
Specifies the position where your site
name is superimposed on the video of
your site.
Specifies the duration for displaying a
site name.
Specifies whether the time zone and time
are superimposed on the local video sent
to remote sites.
The time zone and time are not displayed
on the local video shown on the display
device at your site.
Specifies the color in which a site name
is displayed.
Specifies the font size for the site name
display.
Specifies the typeface of a site name.
This parameter is available only when
Language is set to 中文.
Specifies whether a site name is
displayed in bold.
Fine-tunes the site name's position left or
right on the local video.
Fine-tunes the site name's position up or
down on the local video.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Screen Customization
Setting
This parameter is selected by
default.
None
The default value is Lower
right corner.
The default value is Always
display.
This parameter is not selected
by default.
The default color is white.
The default value is Medium.
The default value is Boldface.
This parameter is not selected
by default.
Value range: 0-96.
The default value is 48.
Value range: 0-96.
The default value is 48.
104