HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
----End
To stop air content sharing, click Stop.
To disconnect the air content sharing client from the endpoint, click Disconnect.
9.3.4 Multi-View
With the multi-view function, you can view multiple local videos in Picture in Picture (PiP) or
split-screen mode on one display.
Procedure
Step 1 Log in to the endpoint web interface. Choose Device Control > Device Control and click the
Multi-View tab.
Step 2 Set Multi-view mode to any of the following:
Step 3 Specify input sources for the multi-view mode you selected.
Step 4 Click the Video Control tab.
Step 5 In the Video Input Source area, set Video Source to Multi-View.
----End
9.3.5 Customizing Shortcut Bar and Desktop Icons
You can customize the shortcut bar and desktop icons on the endpoint web interface so you
can conveniently perform desired operations using these icons.
Background
The following procedure uses customizing shortcut bar icons as an example.
Procedure
Step 1 Log in to the endpoint web interface. Choose System Settings > Display.
Step 2 Click the User defined tab.
Issue 01 (2013-09-30)
The "An Air Content Sharing source device requests to connect to your endpoint. Accept?" message is
displayed on the endpoint web interface and remote controlled UI. Select Accept on either the endpoint
web interface or remote controlled UI. The client successfully connects to the endpoint without any
passwords.
If your endpoint is not used in a conference, the computer desktop is sent to your
endpoint as a presentation when the connection succeeds.
If your endpoint is used in a conference, the computer desktop is sent to remote sites
when the connection succeeds.
PiP
2 panes
3 panes
3 panes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Embedded Web Management Interface
113