Huawei TE40 Administrator's Manual page 37

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Local IP address
Subnet mask
Gateway address
Step 3 Select Save.
Step 4 From Wireless access point, select the wireless router you want to connect to.
Step 5 Press
select Connect.
When the endpoint is connected to the router, the Connection Status changes to
----End
Issue 01 (2013-09-30)
Description

Specifies the IP address for
the endpoint to connect to a
wireless access point to
implement communication.
Specifies the subnet mask
for the IP address of your
endpoint. A subnet mask
divides the IP address into a
network address and a host
address.
Specifies the gateway
address that corresponds to
the IP address of the
endpoint.
on the remote control. When prompted, enter the security key or password and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
endpoint. If you select
this option, you must
also set Local IP address,
Subnet mask, and
Gateway address.
Dynamic IP: The
endpoint automatically
obtains an IP address
over the Dynamic Host
Configuration Protocol
(DHCP). If you select
this option, a DHCP
server must be available
on the network.
3 Network
Setting
Example: 192.168.1.10
This IP address and the IP
address of the wireless
access point must be on the
same network segment. For
example:
If the IP address of the
wireless access point is
192.168.1.100, set Local IP
address to 192.168.1.X. X
can be any integer ranging
from 0 to 255 except 100.
Example: 255.255.255.0
Example: 192.168.1.1
.
29