Sharing A Presentation; Viewing The Combined Picture Of The Presentation And The Video - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
One display device: Based on the default endpoint settings, the display device connected to
the 1 MAIN OUT port can show the video, presentation, remote controlled UI, captions, and
combined pictures.
Two display devices: To show the video and presentation independently on two display
devices, connect the two to the 1MAIN OUT and 2 PC OUT ports if you are using the TE60
or to the 1 MAIN OUT and 2 HDMI OUT ports if you are using the TE50 or TE40. A display
device shows the video when connected to the 1 MAIN OUT port and shows the presentation
when connected to the 2 PC OUT port (or 2 HDMI OUT port). The Dual-screen parameter
must be enabled in order for this to work. For details, see

6.1.2 Sharing a Presentation

A computer can be connected to the endpoint to share files, and the remote sites can view both
your video and the desktop contents of the computer.
Prerequisites
The video source of the presentation has been configured.
The presentation sharing function has been enabled, and the presentation parameters have
been set. By default, the endpoint has the presentation sharing function enabled, and the
default presentation parameter settings support presentation sharing. To modify these
parameters, see
Background
You can select either of the following modes for sharing a presentation:


For details, see
However, in live mode, the endpoint does not support presentation sharing using SIP.
On a Microsoft unified communications (MSUC) network, the endpoint does not support
presentation sharing.
Procedure
Press
To stop sharing a presentation, press
you can also select
6.1.3 Viewing the Combined Picture of the Presentation and the
Video
During a conference, a combined picture of the video and the presentation can be viewed by
pressing
Issue 01 (2013-09-30)
13.3 Setting Advanced Conference
Auto: The endpoint automatically sends the video along with the presentation. This
mode is available only when Presentation mode is set to Live.
Manual: You can use the remote control to share a presentation.
Table 13-3 in
on the remote control to share a presentation.
on the option bar to share a presentation.
on the remote control or selecting
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameters.
13.3 Setting Advanced Conference
on the remote control.
4.2.1 Configuring Video
Parameters.
from the option bar.
6 Conference
Output.
72