Panasonic Industrial Devices Sunx Plc (Panasonic Mewnet-Fp) - Mitsubishi Electric GOT2000 Series Connection Manual

15.6.1

Panasonic Industrial Devices SUNX PLC (Panasonic MEWNET-FP)

Device name
*2*3
Input relay (X)
*3
Output relay (Y)
Internal relay (R)
*2
Special relay (R)
*5
Link relay (L)
Bit device
*2*4
Timer contact (T)
Counter contact (C)
Word device bit
*2
Input relay (WX)
Output relay (WY)
Internal relay (WR)
Special relay (WR)
Link relay (WL)
Timer/Counter (Elapsed value) (EV)
Timer/Counter (Set value) (SV)
Word device
Data register (DT)
Special data register (DT)
*5
Link register (LD)
*5*6
File register (FL)
Bit device word
*1 The above device range is for the case where FP10SH is used.
For FP0, FP1, FP2, FP3, FP5, FP-10(S), or FP-M, device ranges are different in individual CPUs.
*2 Writing to device is not allowed.
*3 Only those devices that have been assigned to I/O contacts by peripheral software can be used.
*4 The device points of the timer and counter differs depending on the head numbers of the counter set by the value of the system
register (No. 5).
*5 This device does not exist in FP0, FP1, and FP-M.
*6 When FP2SH is used, one bank of "32765
*2*4
(except input relay, output relay, internal relay, special relay
*2
*4
*4
Setting range
X0000 to X511F
Y0000 to Y511F
R0000 to R886F
R9000 to R911F
L0000 to L639F
T0 to T3071
C0 to C3071
Specified bit of the following word devices
and link relay)
WX000 to WX511
WY000 to WY511
WR000 to WR886
WR900 to WR911
WL000 to WL639
EV0 to EV3071
SV0 to SV3071
DT0 to DT10239
DT0 to DT32764
DT90000 to DT90511
LD0 to LD8447
FL0 to FL32764
Converting bit devices into word
(Except Timer contact and Counter contact)
3 banks" can be monitored.
15.6 Device Range that Can Be Set
*1
Device No.
representation
Decimal +
Hexadecimal
Decimal
-
Decimal
-
15
15 - 43