(2) EtherNet/IP (OMRON NJ), Gateway
Item
Host
N/W No.
*1
Station
Unit Type
IP Address
Port No.
Communication format
Connection
*1
Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠ ■2.
POINT
POINT
POINT
(1) Communication interface setting by the Utility
(2) Precedence in communication settings
The host is displayed. (The host is indicated with an asterisk
(*).)
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
Select the device according to the connection destination.
Built in Ethernet port: OMRON NJ
Communication unit: CJ1W-EIP21
(Default: OMRON NJ)
Set the IP address of the connected Ethernet module.
(Default: blank)
44818 (fixed)
TCP (fixed)
Set the connection.
(Default: UCMM)
Communication detail settings
The communication interface setting can be changed on the Utility's [Communication setting]
after writing [Communication Settings] of project data.
For details on the Utility, refer to the following manual.
➠
GOT2000 Series User's Manual (Utility)
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
Description
4.3 Ethernet Connection
Set value
-
1 to 239
1 to 64
OMRON NJ,
CJ1W-EIP21
PLC side IP address
44818 (fixed)
TCP (fixed)
UCMM, Class3
4 - 55
4