(3) Connecting terminating resistors
(a)
GOT
• For GT27, GT25(Except GT2505-V), GT23
Set the terminating resistor setting switch of the GOT main unit to "Enable".
• For GT2505-V, GT21
Set the terminating resistor selector to "330Ω".
For the procedure to set the terminating resistor, refer to the following.
➠
1.4.3 Terminating resistors of GOT
(b)
KEYENCE PLC
Connect the terminating resistor on the KEYENCE PLC side when connecting a GOT to a KEYENCE PLC.
➠
6.2.8 PLC Side Setting
6.2 Serial Connection
6
6 - 21