Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 3 | Control Equipment
To jump back from a submenu to an item of the main
menu:
1 Turn the button to move the cursor to the main
menu item number.
2 Push the button. The item number starts blinking.
3 Turn to select another item number.
4 Push to confirm the selection.
OR
1 Turn the button to < Back.
2 Push to confirm.
To jump back from the main menu to the status
screens:
1 Jump back to the main menu.
2 Turn the button to < Back.
3 Push to confirm.
Example:
Set the IP address of the network controller. (This
example assumes you start from the default screen):
Netw Controller
2002/09/27 13:27
1 Turn the button to go to the Menu ... in the status
screens:
Menu...
2 Push the button to confirm:
1 Monitoring
Off
3 Turn the button to go to the Setup submenu:
2 Setup
Bosch Security Systems | 2011-02
4 Push the button to confirm:
5 Turn the button to go to the TCP/IP Setup submenu:
6 Push the button to confirm:
7 Push the button to confirm:
8 Turn the button to move the cursor to the first part of
9 Push the button to confirm:
10 Turn the button to change the first part of the IP
11 Push the button to confirm:
...
2A
Date & Time
2002/09/27 13:27
2B TCP/IP Setup
2Ba Address
000.000.000.000
2Ba Address
000.000.000.000
the IP address:
2Ba Address
000.000.000.000
2Ba Address
000.000.000.000
address:
2Ba Address
192.000.000.000
2Ba Address
192.000.000.000
en | 94
...
Advertisement
Table of Contents
