Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
47.3.11 Zone selection
Using a Zone selection key one or more zones and/or one
or more zone groups can be selected. See figure 47.18
for an overview of the Action programming page for a Zone
selection key.
figure 47. 1 8: Zone selection
•
Action type - Sets the type of action.
•
Available outputs - Shows the available zones,
zone groups and control outputs. Use the dropdown
list to choose the type of outputs that are shown.
•
Add/Remove buttons - Using the > and <
buttons, selected outputs can be added to or
removed from Assigned outputs.
•
Assigned outputs - Shows the outputs that have
been assigned to the key.
Note
For information about creating zones and zone
groups, see section 45.2.
Bosch Security Systems | 2011-02
47.3.12 Cancel selection
The Cancel selection action is used to cancel selections
that have been made. See figure 47.19 for the Action
programming page for a Cancel selection key.
figure 47. 1 9: Cancel selection key
47.3.13 Recall
The Recall action is used to recall selections that have
been made. See figure 47.20 for the Action programming
page for a Recall key.)
figure 47.20: Recall key
en | 391
Advertisement
Table of Contents
