Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 6 | Installation Accessories
14 Close the tool to fix the cable and pull the 'trigger' to
cut the fiber (see figure 29.18).
figure 29. 1 8: Cutting a fiber (3)
15 Repeat steps 13 and 14 for the other plastic optical
fiber in the cable. Both fibers now have the required
length.
16 Slide one of the fibers into the front part of the POF
cutter/stripping tool (tool 6, see figure 29.19).
figure 29. 1 9: Stripping a fiber
Bosch Security Systems | 2011-02
17 Close the tool and pull the fiber out to strip the
sheath from it.
Note
Do not forget to remove the piece of sheath
from the tool.
18 Repeat steps 16 and 17 for the other fiber in the
cable. See figure 29.20 for the result of this part of
the cable-connector installation procedure.
A
figure 29.20: Stripped optical fibers
en | 286
B
Advertisement
Table of Contents
