Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
6 Open the Control outputs category to configure the
control outputs of the CobraNet interface (see
section 43.7.4).
7 Submit the changes. Note that the changes are not
permanent until the configuration is saved (see
section 40.4.4 and section 40.4.5).
43.7.1 Audio inputs
figure 43.35: Configure CobraNet interface step 3
Enter unique names for the audio inputs in the available
text boxes.
43.7.2 Audio outputs
figure 43.36: Configure CobraNet interface step 4
Enter unique names for the audio outputs in the
available text boxes.
Bosch Security Systems | 2011-02
43.7.3 Control inputs
figure 43.37: Configure CobraNet interface step 5
The configuration page for CobraNet interface control
inputs is similar to the configuration page for network
controller control outputs (see section 43.2.5).
43.7.4 Control outputs
figure 43.38: Configure CobraNet interface step 4
The configuration page for CobraNet interface control
outputs is similar to the configuration page for network
controller control outputs (see section 43.2.6).
en | 362
Advertisement
Table of Contents
