Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 3 | Control Equipment
5.6.10 View MAC address
The MAC Address menu item can be used to view the
MAC address of the network controller. The MAC
address is a unique address that is factory-set and cannot
be changed. Within networks, it can be used to get
access to the unit.
table 5. 1 5: MAC address menu item
Menu item
2C MAC address
5.6.11 View version information
The Serial Number, HW Version, SW version and
FW version menu items are used to obtain version
information about the network controller.
table 5. 1 6: Version information menu items
Menu item
2D Serial Number
2E HW Version
2F SW Version
2G FW Version
Bosch Security Systems | 2011-02
Value (read-only)
Description
e.g. 000463-004209
Show the MAC address of the network controller.
Value (read-only)
Description
e.g. 11.0.008A4
Shows the hexadecimal serial number.
e.g. 15.00
Shows the hardware version.
e.g. 2. 1 0. 1 175
Shows the version number of the Praesideo software.
e.g. 3.00. 1 419
Shows the version number of the firmware. This must be the same
for all units in the system.
en | 101
Advertisement
Table of Contents
