Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software
56.7.5 Security
56.7.5. 1
Overview
On the Security tab (see figure 56.13), the security
settings can be defined.
figure 56. 1 3: Security tab
56.7.5.2 Server authentication
Use the controls in the Server authentication block to:
•
Enable and disable server authentication with the
Use authentication box. When server authentication is
enabled, a user name and password must be entered
to get access to the main window (see section 56.5.1).
•
Set the password and user name to get access to the
Logging Server with the Change User Name/Password
button. A password and user name can only be set
when server authentication is enabled. The
password must have at least five (5) characters. The
user name must have at least four (4) characters.
Bosch Security Systems | 2011-02
56.7.5.3 Viewer/Network controller authentication
Use the controls in the Viewer/Network controller
authentication block to set the password and user name
that:
•
Gives a Logging Viewer access to the Logging Server (see
section 57.6.2.5).
•
Gives the Logging Server access to all connected
network controllers.
Note
Make sure that all systems have an account (see
section 40.2) that contains the user name and
password in the Viewer/Network controller
block. Otherwise, the Logging Server cannot
connect to the systems.
en | 453
Advertisement
Table of Contents
