Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
43.2.5 Control inputs
figure 43.7: Configure network controller, step 5
table 43.4: Control inputs configuration
Item
Input
Act on contact
Function
Supervision
Actions
Multiple calls can be started or stopped from a single
control input or keypad key.
•
This applies to Call activation inputs/keys, Start
inputs/keys and Stop inputs/keys.
•
Up to five calls can be started/stopped by a single
action, e.g. an evacuation message on one floor and
alert messages on lower and higher floors.
•
The sub-calls can have different priorities and
zones/zone groups, but have the same activation
behavior (e.g. momentary).
Bosch Security Systems | 2011-02
Value
Break
Make
Various
On, Off
1..5
Description
Unique name for the control input. The input
can be enabled and disabled using the
enable checkbox.
Sets the action of the control input. See
chapter 47.
Sets the action of the control input. See
chapter 47.
Switches supervision of the control input on
(On) or off (Off).
Selects the number of actions for this control
input if it is a Call activation key, Start or Stop
en | 343
Advertisement
Table of Contents
