Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
47.3.21 Local BGM on/off
The Local BGM on/off action is used to turn background
music on or off in predefined zones. See figure 47.28 for
the Action programming page for a Local BGM on/off key.
The Local BGM on/off action combines the Zone selection
(see section 47.3.11) and BGM on/off actions (see section
47.3.18). See figure 47.28 for an overview of the Action
programming page of for a Local BGM on/off key.
Note
This action can also be assigned to control
inputs.
figure 47.28: Local BGM on/off key
•
Action type - Sets the action type.
•
BGM control - Sets the BGM control:
•
On to switch BGM on
•
Off to switch BGM off
•
Toggle to toggle BGM on and off
•
Available outputs - Shows the available zones and
zone groups. Use the dropdown list to choose the
type of outputs that are shown.
•
Add/Remove buttons - Using the > and <
buttons, selected outputs can be added to or
removed from Assigned outputs.
•
Assigned outputs - Shows the outputs that have
been assigned to the key.
Bosch Security Systems | 2011-02
47.3.22 Fault input
Using the Fault input action, a customized message can
be logged and the system is put in the fault state. See
figure 47.29 for an overview of the Action programming
page for a Fault input key.
If the key is set to Acknowledge, then the indicator
functions as fault or emergency buzzer. If the key is set
to Reset then the indicator functions as fault or
emergency indicator.
Note
This action can also be assigned to control
inputs.
figure 47.29: Fault input key
en | 395
Advertisement
Table of Contents
