Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 4 | Amplifiers
8.7.4
Main menu
The Menu ... item provides access to the main menu.
table 8.8: Main menus
Menu item
Description
1 Monitoring
Go to the Monitoring submenu.
See section 8.7.5.
2 Setup
Go to the Setup submenu. See
section 8.7.6 (and further).
8.7.5
Set monitoring options
The Monitoring submenu is used to set which signal is
sent to the monitoring headphones. It can be one of the
audio outputs or no signal at all. It is not possible to set
the volume of the audio outputs on the monitoring
headphones. This means you always hear the audio
output at the monitoring headphones at the same
volume as it is broadcast.
table 8.9: Monitoring submenu
Menu item
1 Monitoring
8.7.6
View version information
The Serial Number, HW Version and SW Version
submenus are used to obtain version information about
the power amplifier.
table 8. 1 0: Version information menu items
Menu item
2A Serial Number
2B HW Version
2C FW Version
Bosch Security Systems | 2011-02
Option
Value 1
Source:
- Output n
Output nr:
1 to 8
- Off*
Value (read-only)
Description
e.g. 07.0.0025B
Shows the hexadecimal serial number.
e.g. 01.01
Shows the hardware version.
e.g. 3.00. 1 419
Shows the version number of the firmware. This must be the same for
all units in the system.
Description
The signal from audio output n is available
on the monitoring headphones output.
The monitoring headphones output is off.
en | 150
Advertisement
Table of Contents
