Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 6 | Installation Accessories
25.2.2 Interior
The interior of the network splitter (see figure 25.3 and
figure 25.4) contains the following:
Note
The numbering in figure 25.4 differs from the
numbering in figure 25.2 and figure 25.3.
9 Tap-off power source - A jumper that specifies
whether the tap-offs are powered from the main
network branch or use an external power supply
connected to the network splitter. See the label at the
rear side of the lid for information about the jumper
settings.
10 External power - On. (Use this setting for
Praesideo.)
11 Tap-off 2 limiter - A jumper that limits the current
for tap-off 2. If the tap-off asks for more current than
allowed, the tap-off is shut down. See the label at the
rear side of the lid for information about the jumper
settings.
12 Tap-off 1 limiter - A jumper that limits the current
for tap-off 1. If the tap-off asks for more current than
allowed, the tap-off is shut down. See the label at the
rear side of the lid for information about the jumper
settings.
10
1
figure 25.4: Jumper identification
Bosch Security Systems | 2011-02
9
3 4 5
6 7 8
2
11
12
Main network
Tap-off powered
from:
External power
0.8 A
Current limit
Tap-off 1
1.6 A
2.5 A
0.8 A
Current limit
Tap-off 2
1.6 A
2.5 A
On
External power
follows
Main network
Fault
LED
Power
en | 265
1
2
3
4
5
6
7
8
9
10
11
12
Advertisement
Table of Contents
