Mitsubishi Electric AE-200A Instruction Book page 72

[5] Display Format
Set the items in "Display Format".
Procedures
1. In "Unit of Temperature", select the desired temperature unit.
2. In "Pressure unit of measure", select the desired pressure unit.
3. In "Date Format", select the desired display format for year, month, and date.
4. In "Time Format", select the desired display of time format.
5. In "Group name display on Condition List screen", select [ON] to display the group names under the icons
on the Condition List screen, accessible via the Web Browser for System Maintenance Engineer. Select [OFF]
not to display the group names.
6. In "Filter Sign Display", select [ON] to display the filter sign on the Condition List screen, accessible via the
Web Browser for System Maintenance Engineer, and select [OFF] not to.
When the "Filter Sign Display" is set to [OFF], the filter sign will not appear on the Condition List screen even
when the indoor unit detects a filter cleaning signal.
If the filter is regularly cleaned and the sign display is unnecessary, set it to [OFF].
7. In "Room temperature", select the desired temperature display option to be used on the Condition List
screen. Select [Always show] to display the temperature at all times, [Show during operation] to display the
temperature only during operation, and [Hide] not to display the temperature.
Note
• Selecting [Show during operation] is recommended because the temperature shown may be higher than
the actual temperature especially when the unit is stopped during the Heat mode.
8. In "Occupancy sensor display", make the Show/Hide setting for the occupancy/vacancy status that is
detected by the built-in occupancy sensor on the ME remote controller (North America: PAR-U01MEDU,
Other countries: PAR-U02MEDA).
Select [Hide] not to display the occupancy/vacancy status on the Condition List screen.
Select [Show occupancy icon] to display the occupancy icon when the sensor on the remote controller
detects occupancy.
Select [Show vacancy icon] to display the vacancy icon when the sensor on the remote controller detects
vacancy.
Select [Show both icons] to display the occupancy or vacancy icon according to the occupancy status of the
room.
Note
• If the ME remote controller has no built-in occupancy sensor, the occupancy/vacancy icons will not be
displayed on the Condition List screen.
WT07442X02
Occupancy icon
(Blue)
72
Vacancy icon
(Gray)