Mitsubishi Electric AE-200A Instruction Book page 126

2. Open the "Initial setting" sheet of "AE-200ChargeCalc.xlsm" and set delimiters ((,) Comma/ (;) Semicolon),
and decimal marker ((.) Dot/(,) Comma) for CSV files to be imported.
Make sure to make this setting is the same as the CSV output format of AE-200 Charge Calculation Tool.
(Refer to section 4-1-2 "Charge Calculation Tool settings" (5).)
Select the import CSV delimiter
In the case of (,) Comma, 0
In the case of (;) Semicolon, 1
Select the import CSV decimal separator
In the case of (.) Dot, 0
In the case of (,) Comma, 1
After configuring settings, click [Update] to complete the process.
Note
• "AE-200ChargeCalc.xlsm" uses macros. If a message is displayed saying that macros cannot be used,
change the macro security level so that macros become available.
[2] Calculating the air conditioning charges
The air conditioning charge is calculated based on the CSV file of the air conditioning charge ratio output by the
AE-200 Charge Calculation Tool and the electric energy calculated by the electricity meter.
Procedures
1. Start "AE-200ChargeCalc.xlsm".
WT07442X02
126