Closing Date Calculation (Automatic Output); Preparation Of The Pc - Mitsubishi Electric AE-200A Instruction Book

3-3. Closing date calculation (automatic output)

This section explains the closing date calculation (automatic output) when the AE-200 is connected to a PC via a
LAN.
The AE-200 must be connected to the PC and printer (for printing) via the LAN.

3-3-1. Preparation of the PC

By connecting the AE-200 to the PC (running the Charge Calculation Tool) via a LAN, both "Print" and "CSV
output" for the charge calculation results will be enabled.
To print out the data, a printer must be connected via the LAN.
PC
LAN
Printer
* The AE-50/EW-50 units are omitted in the figure above.
Closing date calculation (automatic output) is only available when connected via a LAN.
The data will be output automatically at 5:00 AM on the day after the "Closing date" set on the Charge
Calculation Tool. If output is set to "Daily", the previous day's data will be automatically output at 5:00 AM
each day.
You can specify "Print", "CSV output" or both as the output options for the charge calculation results.
Prepare a PC and printer that meet the following criteria:
• The PC must be turned on when the data is automatically output (5:00 AM)
• If login settings are set for the PC, a user must be in logged-in status when the data is automatically output
• The PC must not be in standby or sleep mode when the data is automatically output
• The Charge Calculation Tool must not be launched manually when the data is automatically output
* The tool starts up automatically.
• The AE-200 must be connected to the PC via a LAN
• If "Print" is selected as the output method, the printer must be turned on when the data is automatically
output (5:00 AM)
• If "Print" is selected as the output method, there must be "Default printer" setting in the Windows printer
settings.*
* The procedures for setting the printer as the default printer is shown below.
Procedures
1. Click [Devices and Printers] in the Start menu.
2. Check that [
If the [ ] is shown on other printer, right-click the printer to be used for printing and then click [Set as
default printer].
WT07442X02
HUB
LAN
LAN
AE-200
LAN
AE-200
] is shown on the printer to be used for printing.
25