Settings On The Charge Calculation Tool - Mitsubishi Electric AE-200A Instruction Book

3-3-3. Settings on the Charge Calculation Tool

(1) Print setting
Procedures
1. Select [Output] in "Print setting".
2. Check the [Daily] or [Monthly] checkbox or both.
(In the example shown above, [Monthly] is selected as the print setting.)
Note
Set the PC and printer to meet the following operating environment.
• Settings are required to carry out the closing date calculation (automatic output).
• The PC must be turned on when the data is automatically output (5:00 AM)
• If login settings are specified for the PC, a user must be in logged-in status when the data is automatically
output
• The PC must not be in standby or sleep mode when the data is automatically output
• The Charge Calculation Tool must not be launched manually when the data is automatically output
• The AE-200 must be connected to the PC via a LAN
• If "Print" is selected as the output method, the printer must be turned on when the data is automatically
output (5:00 AM)
• If "Print" is selected as the output method, there must be "Default printer" setting in the Windows printer
settings.
(2) CSV output setting
Procedures
1. To save the calculation results as a file, select [Output] in "CSV output setting".
2. Check the [Daily] or [Monthly] checkbox or both.
3. Click [Browse] in "CSV output destination directory" and select your intended file output destination folder.
(In the example shown above, [Monthly] is selected as the print setting.)
Note
• Settings are required to carry out the closing date calculation (automatic output).
• When [Output] is selected in "CSV output setting", the Charge Calculation Tool starts up at the time when
the data is automatically output (5:00 AM).
• CSV files will be output to a directory with the closing date (\"year"\"month"\) added to the specified CSV
output destination directory.
Example: When CSV files are output at 5:00 AM on February 1, 2015 (the day after the closing date), the
dates on the output files will be the closing date year and month (day).
→ The directory will be "C: \CCTool\ChargeFile\2015\01\"
• The file names for charge calculation results for "Each energy management block (tenant)" will be as
follows:
Daily: "[year][month][day]B.csv" (e.g.: A file output on February 1, 2015 will be output as "20150131B.
csv".)
Monthly: "[year][month]B.csv" (e.g.: A file output on February 1, 2015 will be output as "201501B.csv".)
• The file names for charge calculation results for "Each metering device" will be as follows:
Daily: "[year][month][day]W.csv" (e.g.: A file output on February 1, 2015 will be output as "20150131W.
csv".)
Monthly: "[year][month]W.csv" (e.g.: A file output on February 1, 2015 will be output as "201501W.csv".)
WT07442X02
27