Basic System Settings - Mitsubishi Electric AE-200A Instruction Book

6-5-2. Basic System settings

Click [Basic Settings] > [Basic System] to access the basic system settings screen.
Make necessary basic system settings such as unit settings and M-NET settings for each centralized controller.
Target centralized
controller
Select the connected
centralized controller whose
basic settings are to be
made.
Unit Settings
Set the centralized controller
name and unit ID. The serial
number and the software
version can be acquired.
Decimal point character
and separator character
for CSV file
Set the format of the CSV
file that is output from the
centralized controller.
Display Format
Set the screen display items
for the centralized controller
and the Web browser.
[1] Unit Settings
Set the AE-200/AE-50/EW-50 unit name and unit ID in "Unit Settings".
Clicking [Acquire] will start communication with the AE-200/AE-50/EW-50 selected in "Target centralized
controller", and its serial number and software version will be displayed.
Procedures
1. Enter the unit name in "Name" in 40 characters or less. The name entered here will be used as a sender
name in the error notification e-mail and e-mail alarm.
2. Enter the unit ID in "Unit ID" in 6 figures. Use this setting to manage the multiple unit IDs.
Note
• The unit name and the unit ID can be set for each centralized controller that can be selected in "Target
centralized controller".
• The name entered here will be displayed in "Target centralized controller".
• The unit ID will be used as a sender ID in the error notification e-mail and e-mail alarm.
• When the software is updated, check that the ####(****) in "Software Version" is the same as the # of the
update file (AExx_FW####_****.dat).
For example, if the AE-200 software version is 7.30 (1.05), the update file name is "AE200_FW0730_0105.
dat".
WT07442X02
Save
Click to save the settings.
69
M-NET Settings
Set the M-NET address
and range of prohibited
controllers.
External Input Setting
Set the external signal input
mode.
Advanced Setting
Click to display the screen
for making advanced
settings.
Back
Click to display the previous
settings without making any
changes.