Specified Date Calculation (Usb); Preparation Of The Pc; Data Acquisition Using Usb Memory - Mitsubishi Electric AE-200A Instruction Book

3-2. Specified date calculation (USB)

This section explains how to calculate the charges for the specified period when CSV data (the apportioned
results) has been exported from the AE-200 using a USB memory.

3-2-1. Preparation of the PC

You can export the CSV data (apportioned results) from the
AE-200 to a USB memory, calculate the data on a PC (running
the Charge Calculation Tool) and then "Print" and "CSV output"
the charge calculation results.

3-2-2. Data acquisition using USB memory

[1] CSV files (apportioned results) in systems where electric energy is metered (with-metering-
device method)
"Energy management block" data and "Metering device" data are required for the charge calculation.
This section explains how to output these data from the AE-200 to USB memory.
Procedures
1. Using an L-shaped driver, remove the hexagon-socket bolt on the underside of the AE-200 unit and then
remove the cover.
Hexagon-socket
bolt
Note
• If a separately sold Surface cover with USB port (PAC-YG72CWL-J) is used, you do not need to remove
the AE-200 cover. Open the USB port cover.
WT07442X02
AE-200
AE-200 cover
L-shaped driver (supplied)
PC
Printer
18
USB memory
HUB
LAN
LAN
AE-200
AE-200