Other Tasks - Mitsubishi Electric AE-200A Instruction Book

8-6. Other Tasks

(1) Data check before charge calculation
If you want to recalculate data for which charge calculation has been carried out in the past, do the
recalculation on the Charge Calculation Tool using the pre-calculation data shown below.
• Storage location
C:\Users\(user name)\Documents\CCTool\Log\"Date printed"
• File name
① Energy management block data
M_01_App_IC_"Date/time printed"_"3-digit number".csv
② Metering device data
M_01_App_MC_"Date/time printed"_"3-digit number".csv
(2) Clearing carried-over data
If even one unit price setting has been deleted on the Initial Setting Tool, clear the carried-over data in the
apportioned data.
This procedure is required when unit price 2 has been deleted, etc.
If the carried-over data has not being cleared, an error code "0095" may result.
• Clear the carried-over data.
On the AE-200's LCD, select [Maintenance] > [Apportioned data] > [Carryover] and then select [Centralized
controller] as the "Target".
Select the connected AE-50 or EW-50 as the "Centralized controller".
(With each touch, the display changes in the following sequence: [Exp1]→[Exp2]→[Exp3]→[Exp4].)
Touch "Unit price" and then select from unit price 1 to 5.
After the settings are completed, touch [Clear].
Note
• If the deleted charge time period applies to an AE-50/EW-50 connected across multiple systems, carry out
this procedure on all the systems.
If you inadvertently select [Clear] for the unit price that is currently in use, the carried-over increment will
be deleted.
WT07442X02
Unit price 2
123