Table 5-47. Ecp Default Correlation To Forced Logical Input Bit Map; Figure 5-54. Ecp Default Logical Input List - ABB TPU2000 Technical Manual

3. The default list corresponds to the Logical Input mapping of Logical Inputs (hereto referred as LI) as
illustrated in Table 5-47.
4. If one would wish to change the relay protective function element mapped to the specific LI, depress
the "ENTER" key. The display in Figure 5-55 shall result.
5. The user would then scroll down the list and highlight the element desired to be mapped to the
specific LI within the edited list.
6. Depress the "ENTER" key to map the selected element into the table.

Table 5-47. ECP Default Correlation to Forced Logical Input Bit Map

FLI Description
Number
FLI 01 3 Phase % Diff. Current Control
FLI 02 3 Phase Inst. Differential Current
Control
FLI 03 Winding 1 Phase Time
Overcurrent Control
FLI 04 Winding 2 Phase Time
Overcurrent Control
FLI 05 Winding 1 Neutral Time
Overcurrent Control
FLI 06 Winding 2 Ground Time
Overcurrent Control Winding 2
FLI 07 Phase Instantaneous Level 1
Enable Winding 1
FLI 08 Phase Instantaneous Level 1
Enable Winding 2
FLI 09 Neutral Instantaneous Level 1
Enable Winding 1
FLI 10 Ground Instantaneous Level 1
Enable Winding 2
TPU2000/2000R Modbus/Modbus Plus Automation Guide

Figure 5-54. ECP Default Logical Input List

User
Name
87 T
87H
51P-1
51P-2
51N-1
51G-2
50P-1
50P-2
50N-1
50G-2
FLI Description
Number
FLI 17 Alternate Settings 1 Enable
FLI 18 Alternate Settings 2 Enable
FLI 19 Event Capture Initiate 1
FLI 20 Event Capture Initiate 2
FLI 21 Waveform Capture Initiate
FLI 22 Differential Trip Output
Contact Enable
FLI 23 Sudden Pressure
FLI 24 Trip Coil Monitor Enable
FLI 25 User Logical Input 1
FLI 26 User Logical Input 2
User
Name
ALT 1
ALT 2
ECI 1
ECI 2
WCI
TRIP
SPR
TCM
ULI 1
ULI 2
147