Figure 2-3. Tpu2000 And Tpu2000R Communication Cards - ABB TPU2000 Technical Manual

TPU2000/2000R Modbus/Modbus Plus Automation Guide

Figure 2-3. TPU2000 and TPU2000R Communication Cards

The Ethernet based protocol hardware cards my only be added to the TPU 2000R based platforms. As per the
selections in Tables 2-3 and 2-5, the ethernet cards may not be inserted in TPU 2000. The form factor of the card
is illustrated in figure 2-3a. Note the card does not have a Phoenix connector to connect RS485 connections nor
does it have IRIG B connections
The TPU2000 Communication card is housed within a removable chassis. The communication card mates with
edge card connectors located at the front and bottom of the removable chassis. Figure 2-3 illustrates the
mounting location of the TPU2000 Communication card. Figure 2-4 illustrates the communication port locations
of the TPU2000, which may be configured to communicate with the protocols described in Section 1 of this
document.
The TPU2000R mates with the unit's main board to enable/disable Com Ports 1,2,3, and AUX COM. The
communication cards physical interfaces protrude through the sheet metal back plate housing of the unit and
allow for access to the physical connection ports. Figure 2-5 illustrates the location of the communication board
assembly.
TPU2000R
COMMUNICATION
CARD (TYPICAL)
DPU 2000 R COMMUNICATION CARD (TYPICAL)
Figure 2-3a. TPU 2000R Communication Cards
AUX/COM
3.0
TPU2000 COMMUNICATION
CARD (TYPICAL)
4