Suzuki Swift Sport 2004 Service & Repair Manual page 810

5A-166 Automatic Transmission/Transaxle:
91) Bend dents of lock washer (1) in order to prevent
displacement of lock washer.
92) Install manual select lever (1).
Tightening torque
Manual select lever nut (a): 13 N·m (1.3 kgf-m,
9.5 lb-ft)
1
93) Install engine mounting LH bracket (1).
Tightening torque
Engine mounting LH bracket bolt (a): 55 N·m (
5.5 kgf-m, 40.0 lb-ft)
1
I3RM0B510075-01
(a)
I3RM0B510076-01
I3RM0B510077-01
94) Install torque converter (3) noting the following
points.
CAUTION
!
• Before installing converter, make sure that
its pump hub portion is free from nicks,
burrs or damage which may cause oil seal
to leak.
• Be very careful not to drop converter on oil
pump gear. Damage in gear, should it
occur, may cause a critical trouble.
• Install torque converter aligning grooves (1) of
torque converter and projection (2) of oil pump
drive gear.
• Install torque converter, using care not to damage
oil seal of oil pump.
• After installing torque converter, check that
distance "a" is within specification.
Torque converter installing position
"a": More than 19.9 mm (0.783 in.)
• Check torque converter for smooth rotation.
• Apply grease around cup (6) at the center of
torque converter.
"C": Grease 99000–25011 (SUZUKI Super
Grease A)
4. Flange nut
I2RH0B510337-01
5. Torque converter housing