Diagnostic Information And Procedures; Air Bag Diagnostic System Check; Air Bag Diagnostic System Check Flow - Suzuki Swift Sport 2004 Service & Repair Manual

8B-10 Air Bag System:
6. "A/BAG" fuse in junction block assembly (including BCM)
7. Air bag harness in floor harness

Air Bag Diagnostic System Check

WARNING
!
To avoid deployment when troubleshooting
the air bag system, do not use electrical test
equipment such as a battery powered or AC
powered voltmeter, ohmmeter, etc., or any
type of electrical equipment other than that
specified in this manual. Do not use a non-
powered probe type tester.
Instructions in this manual must be followed
carefully, otherwise personal injury may
result.
CAUTION
!
The order in which DTCs are diagnosed is
very important. Failure to diagnose the DTCs
in the order specified may result in extended
diagnostic time, incorrect diagnosis and
incorrect parts replacement.

Air Bag Diagnostic System Check Flow

Flow test description
Step 1: Check that "AIR BAG" warning right lights.
Step 2: Check that "AIR BAG" warning right lights.
Step 3: Check that "AIR BAG" warning right flashes 6 times after ignition switch is turned ON.
Step 4: Check that history codes are in SDM memory.
Step 5: Check that current code is in SDM memory.
Step
1 1) Make sure that battery voltage is about 11 V or higher.
2) Note "AIR BAG" warning right as ignition switch is turned
ON.
Does "AIR BAG" warning right come ON when ignition
switch is turned ON?
2 Does "AIR BAG" warning right come ON steady?
3 Does "AIR BAG" warning right turn OFF, after flashing 6
times?
13. Side curtain-air bag (inflator) module (if equipped)
14. Air bag harness in instrument panel harness

Diagnostic Information and Procedures

S7RS0B8204001
Action
The diagnostic procedures used are designed to find
and repair air bag system malfunctions.
To get the best results, it is important to use the
diagnostic flow and follow the sequence in the following.
1) Perform the "Air Bag Diagnostic System Check
Flow".
(The "Air Bag Diagnostic System Check Flow" must
be the starting point of any air bag system diagnosis.
The "Air Bag Diagnostic System Check Flow" checks
for proper "AIR BAG" warning right operation
through "AIR BAG" warning right and whether air
bag DTCs exist.)
2) Refer to the proper diagnostic flow as directed by the
"Air Bag Diagnostic System Check Flow".
(The "Air Bag Diagnostic System Check Flow" will
lead you to the correct flow to diagnose any air bag
system malfunctions. Bypassing these procedures
may result in extended diagnostic time, incorrect
diagnosis and incorrect parts replacement.)
3) Repeat the "Air Bag Diagnostic System Check Flow"
after any repair or diagnostic procedures have been
performed.
(Performing the "Air Bag Diagnostic System Check
Flow" after all repair or diagnostic procedures will
ensure that the repair has been made correctly and
that no other malfunctions exist.)
Yes
Go to Step 2.
Proceed to ""AIR BAG"
Warning Right Comes
ON Steady".
"AIR BAG" warning right
circuit is in good
condition. Go to Step 4.
S7RS0B8204002
No
Proceed to ""AIR BAG"
Warning Right Does Not
Come ON".
Go to Step 3.
"AIR BAG" warning right
circuit is in good
condition. Go to Step 5.