Suzuki Swift Sport 2004 Service & Repair Manual page 669

Scan tool data
TORQUE
REDUCTION SIGNAL
ENGINE COOLANT
TEMPERATURE
AIR CONDITIONER
SIGNAL
ENGINE TORQUE
SIGNAL
SLIP RPM
MIL REQUEST
FUEL CUT FLAG
Scan Tool Data Definitions:
GEAR POSITION
Current gear position computed by throttle position
coming from ECM and vehicle speed.
ENGINE SPEED (RPM)
Engine speed computed by reference pulses from
crankshaft position sensor.
INPUT SHAFT REVOLUTION (RPM)
Input shaft revolution computed by reference pulses
coming from input shaft speed sensor on transaxle case.
OUTPUT SHAFT REVOLUTION (RPM)
Output shaft revolution computed by reference pulses
coming from output shaft speed sensor on transaxle
case.
BATTERY VOLTAGE (V)
Battery voltage read by TCM as analog input signal by
TCM.
ATF TEMPERATURE (°C, °F)
ATF temperature decided by signal from transmission
fluid temperature sensor installed on valve body.
SHIFT SOLENOID-A COMMAND
ON: ON command being outputted to shift solenoid
valve-A (No.1)
OFF: ON command not being outputted to shift solenoid
valve-A (No.1)
SHIFT SOLENOID-A MONITOR
ON: Electricity being passed to shift solenoid valve-A
(No.1)
OFF: Electricity not being passed to shift solenoid valve-
A (No.1)
SHIFT SOLENOID-B COMMAND
ON: ON command being outputted to shift solenoid
valve-B (No.2)
Vehicle condition
While on gear upshifting with 25% or more throttle
opening
Under condition of not shifting gear
Ignition switch ON
Ignition switch ON and air conditioner switch OFF
Ignition switch ON and engine stop
Engine running at idle speed and select lever is in "P"
range
Engine running, vehicle stop and select lever is in "D"
range
Ignition switch ON
Ignition switch ON
Automatic Transmission/Transaxle:
Normal condition / reference
Engine coolant temperature is
Engine speed is displayed
OFF: ON command not being outputted to shift solenoid
valve-B (No.2)
SHIFT SOLENOID-B MONITOR
ON: Electricity being passed to shift solenoid valve-B
(No.2)
OFF: Electricity not being passed to shift solenoid valve-
B (No.2)
TIMING SOLENOID COMMAND
ON: ON command being outputted to timing solenoid
valve
OFF: ON command not being outputted to timing
solenoid valve
TIMING SOLENOID MONITOR
ON: Electricity being passed to timing solenoid valve
OFF: Electricity not being passed to timing solenoid
valve
TCC SOLENOID
Electric current value ratio between electric current value
being outputted from TCM to solenoid and maximum
value can be outputted by TCM.
PRESSURE CONTROL SOLENOID
Electric current value ratio between electric current value
being outputted from TCM to solenoid and maximum
value can be outputted by TCM.
VEHICLE SPEED (KPH/MPH)
Vehicle speed computed by reference pulse signals
coming from vehicle speed sensor on transaxle case.
O/D OFF SWITCH ("3" position switch)
Inputted signal from "3" position switch in select lever
assembly.
ON: Shift select lever to "3" or "2" range
OFF: Shift select lever to other above range
5A-25
values
ON
OFF
displayed
OFF
0 N⋅m
0 RPM
OFF
OFF