Step
2
1) With ignition switch OFF, disconnect "L32" connector
located near the glove box.
2) Check proper connection to floor harness connector at
terminal "L32-1" and "L32-2".
3) If OK, then connect special tools (B) and (D) to "L32"
connector.
Special tool
(B): 09932–75010
(D): 09932–77320
"L32"
DRIVER
BASE OF COLUMN
4) Check SDM DTC.
NOTE
At this time, DTC B1041 may be output, but it is
not related to this check.
With ignition switch ON, is DTC B1032 indicated?
Action
(D)
PASSENGER
(B)
I4RS0A820015-01
Air Bag System:
Yes
Go to Step 3.
8B-31
No
"GRN/RED" circuit
shorted to "GRN" circuit,
"GRN/RED" circuit or
"GRN" circuit shorted to
other circuit in
instrument panel
harness.