Suzuki Swift Sport 2004 Service & Repair Manual page 1135

• Contact coil and combination switch assembly
– Check wire harness and connectors for damage or
tightness.
– Check contact coil case for damage.
• Instrument panel member and reinforcement
– Check for any distortion, bending, cracking or other
damage.
– Check instrument panel for cracks or deformities.
• Passenger air bag (inflator) module
– Check for dents, cracks, damage or fitness.
– Check harness and connector for damage or
tightness.
• SDM
– Check for external damage such as deformation,
scratch, crack, peeled paint, etc.
– Check SDM for a cause in itself preventing its
proper installation. (There is a gap between SDM
and SDM plate, or it cannot be fixed securely.)
– Check connector or lead wire of SDM for scorching,
melting or damage.
– Check SDM connector and terminals for tightness.
– Check if SDM sets a DTC and is judged as
malfunctioning according to the diagnostic flow.
• Air bag wire harness and connections
– Check for damages, deformities or poor
connections.
Refer to "Inspection of Intermittent and Poor
Connections".
– Check wire harness clamps for tightness.
– For air bag harness including in instrument panel
harness replacement, refer to "Passenger Air Bag
(Inflator) Module Repair Harness Installation".
I4RS0A820048-01
1. Main harness
2. Grounding point
3. Floor harness
• Forward-sensor
– Check sensor (1) and front panel (2) for damage,
bend or rust.
– Check connector (3) or lead wire (4) of forward-
sensor for scorching, melting or damage.
I4RS0A820049-01
4
I5RH01820092-01
Air Bag System:
2
4
1
3
5
I4RS0A820004-01
4. Instrument panel harness
5. Seat harness
3
1
2
I4RS0A820050-01
8B-97