Table of Contents
Advertisement
2C-4 Rear Suspension:
Rear Shock Absorber Bush Removal and
Installation
Removal
1) Remove rear shock absorber referring to "Rear
Shock Absorber Removal and Installation".
2) Remove rear shock absorber bushes (1).
Installation
1) Install rear shock absorber bushes (1).
NOTE
For proper installing direction of shock
absorber bushes (1), refer to the figure.
2
2. Body panel
2) Install rear shock absorber referring to "Rear Shock
Absorber Removal and Installation".
Rear Shock Absorber Bush Inspection
Inspect for cracks, deformation or damage. Replace any
S7RS0B2306003
defective parts.
1
Rear Coil Spring Removal and Installation
Removal
1) Hoist vehicle and remove rear wheels.
2) Support rear axle (1) by using two floor jacks (2) to
1
I4RS0A230006-01
3) Detach shock absorbers (1) lower side (right & left)
4) Lower rear axle gradually as far down as the coil
1
5) Remove coil spring (2).
I4RS0A230007-01
prevent it from lowering.
1
2
from rear axle.
spring (2) can be removed.
CAUTION
!
Be careful not to lower rear axle down too
much.
It may cause damage to brake flexible hose,
wheel speed sensor lead wire and parking
brake cable.
2
S7RS0B2306004
I4RS0A230008-01
S7RS0B2306005
2
I6RS0C230006-01
1
I4RS0A230010-01
Hide quick links:
Advertisement
Chapters
Table of Contents
