Toro Workman 1100 Service Manual page 86

1. Ball bearing
2. Case (RH)
3. Governor shaft
D. Remove ball bearing from the case. Ball bearing
roller balls must be free of deformation and scoring.
Ball bearing must spin freely and have minimum ax-
ial play. Replace ball bearing as necessary.
Drive Train
2
6
1
Figure 50
Page 5 – 32
5
4
4. Governor fork
5. Stopper
6. Screws
E. Replace governor shaft if cracked, bent, or ex-
cessively worn.
F. Replace governor fork or stopper if bent or de-
formed.
3
Workman 1100/2100/2110