Toro Workman 1100 Service Manual page 79

1. Snap ring
2. Axle case
IMPORTANT: Do not reuse snap ring. Discard and
replace ring with new one.
B. Remove snap ring from the axle case. Remove
axle shaft from case.
IMPORTANT: When replacing ball bearings, both
ball bearings must be replaced as a set.
4. Disassemble input shaft assembly.
1. Input shaft
A. Remove governor sleeve from the input shaft.
Workman 1100/2100/2110
2
4
1 3
Figure 38
3. Axle shaft
4. Ball bearing
C. Ball bearing roller balls must be free of deforma-
tion and scoring. Ball bearing must spin freely and
have minimum axial play. Replace ball bearing as
necessary.
1
2
Figure 39
2. Governor sleeve
Page 5 – 25 Drive Train