Toro Workman 1100 Service Manual page 75

1. Flange bolts
2. Axle bracket
E. Remove three flange bolts securing the axle
bracket and axle case to each case. Separate brack-
et from each axle case.
1. Flange bolt
F. With the input shaft side down, loosen and re-
move flange bolts and nuts securing the case (RH)
and case (LH) together.
Workman 1100/2100/2110
3
Figure 30
3. Axle case
2
1
Figure 31
2. Flange nut
Page 5 – 21
1
2
Drive Train