Dchp; Current Ip Address; Host Name; Domain - Linksys SPA 900 Series Administration Manual

9 Network
•
•
•
•
•
•
•
•
•

9.1 DCHP

Shortcut: Setup, 9, edit, y/n, ok
When DHCP is enabled, the phone obtains its IP address from a DHCP server.
To view DHCP status, press the Setupbutton and press 9, or scroll down to the Network option and press
the select soft key. The displays shows 1 DHCP Enable with a Yes or No to indicate the current status.
To enable or disable DHCP, press the edit soft key and press the y/n soft key to toggle between Yes and
No. After making the selection, press the ok button and the display returns to the Network menu.

9.2 Current IP Address

Shortcut: Setup, 9, 2 save
To view the current IP address, press 2 on the Network menu, or scroll down until Current IP Address
is highlighted and press the select soft key. The Current IP Address is set in one of the following ways:
•
•

9.3 Host Name

Shortcut: Setup, 9, 3 save
The Host Name is set by the administrator. The user cannot change the setting.To view the Host Name,
press 3 from the Network menu, or scroll down to Host Name and press the select soft key.

9.4 Domain

Shortcut: Setup, 9, 4 save
The Domain Name displays the name of the domain in which the phone is operating and is not user
configurable. To view the Domain, press 4 from the Network menu, or scroll down to highlight Domain
and press select.
Linksys IP Phone Administrator Guide
4-10
9.10 Non DHCP Default Route
9.11 Non DHCP DNS 1
9.12 Non DHCP DNS 2
9.13 Non DHCP NTP Server 1
9.14 Non DHCP NTP Server 2
9.15 Multicast Address
9.16 Enable VLAN
9.17 VLAN ID
9.18 CDP
Receive the address from a DHCP server by enabling DHCP (Option 9.1)
Manually set the address using the Non DHCP IP Address option (Option 9.8)
Chapter 4 SPA900 Series LCD Command Reference
Firmware Version 5.1