User; Call Forward; Speed Dial; Supplementary Services - Linksys SPA 900 Series Administration Manual

User

User
This section describes the fields for the following headings on the User tab:
•
•
•
•
•
•
•

Call Forward

See

Speed Dial

For the SPA901, speed dial is discussed in
Note
This section does not apply to the WIP310 wireless phone.
Field
Speed Dial 2/3/4/5/6/7/8/9

Supplementary Services

The Linksys IP phone provides native support of a large set of enhanced or supplementary services. All
of these services are optional. The parameters listed in the following table are used to enable or disable
a specific supplementary service. A supplementary service should be disabled if a) the user has not
subscribed for it, or b) the Service Provider intends to support similar service using other means than
relying on the Linksys IP phone.
Most supplementary service paramters are listed in
Linksys IP Phone Administrator Guide
5-48
Call Forward, page 5-48
Speed Dial, page 5-48
Supplementary Services, page 5-48
Web Information Service Settings (SPA962), page 5-49
Traffic Service Information Settings (SPA962), page 5-49
Audio Volume, page 5-50
Phone GUI Menu Color Settings (SPA962 only), page 5-50
Vertical Service Activation Codes, page 5-22
Description
Target phone number (or URL) assigned to speed dial 2, 3, 4, 5, 6, 7, 8, or 9.
Defaults to blank.
Chapter 5
for information on call forwarding parameters.
Call Forward, page 5-48
Supplementary Services, page
Linksys IP Phone Field Reference
5-33.
Firmware Version 5.1