Interdigit Short Timer; Dial Plans; System Administration; Reboot And Restart - Linksys SPA 900 Series Administration Manual

Chapter 3 Managing Linksys IP Phones

Interdigit Short Timer

ParName
Default
The <Interdigit_Short_Timer> specifies the default maximum time (in seconds) allowed between dialed
digits, when at least one candidate digit sequence is complete as dialed (see the following discussion of
Dial_Plan parameters for an explanation of candidate digit sequences).

Dial Plans

ParName
Default
The Dial_Plan parameters contain the actual dial plan scripts for each line n, where n is a number from
1 to 4.

System Administration

This section describes features and operations required for administering and maintaining the basic
function of the Linksys IP phone. It includes the following topics:
•
•
•
•
•
•
•
•

Reboot and Restart

•
•
You must confirm the chosen option before continuing.
Firmware Version 5.1
Interdigit_Short_Timer
3
Dial_Plan[n] for Each Line n
(*xx | [3469]11 | 0 | 00 | <:1408>[2-9]xxxxxx |
1[2-9]xx[2-9]xxxxxx | 011x. )
Reboot and Restart, page 3-37
Factory Reset, page 3-38
Password Protection, page 3-38
Managing the Time/Date, page 3-38
Daylight Saving Time, page 3-38
Using Star Codes to Activate/Deactivate Services, page 3-39
Disabling Services, page 3-41
Error and Log Reporting, page 3-42
Reboot cold boots the phone and restarts the phone's DHCP client.
Restart warm boots the phone, without restarting the phone's DHCP client.
System Administration
Linksys IP Phone Administrator Guide
3-37