Audio Volume Adjustment - Linksys SPA 900 Series Administration Manual

Chapter 3 Managing Linksys IP Phones
Each log is shown on the web page with the following syntax:
name,ext-id,date-time stamp
Where:
•
•
•
For example:
Joe Smith,14089991234,10/18 11:15a
No name appears if the name is not available.
Table 3-4
Table 3-4
Operation
To view a call log
To delete a log
To edit a log
To call a log entry
To save a log entry into Personal
Directory (if the directory is not
already full)

Audio Volume Adjustment

You can adjust four kinds of audio volume. Note that you must save the volume immediately after
adjusting:
•
•
•
•
To adjust the volume, press the VOL key to invoke the volume adjustment screen. Use the UP/DOWN
keys to increase or decrease the volume, then press the Save softkey. The kind of volume to adjust is by
context. When no audio device is selected at the moment, the Ringer volume is adjusted. Each
Firmware Version 5.1
ext-id is the extension or phone number of the call peer.
name is the call peer name. If this field is missing, the peer name is not available.
date-time stamp is the time at which the call log is entered. It has the format mm/dd hh/mm<a|p> (a
= am and p = pm).
summarizes call log operations..
Call Log Operations
Ringer volume (on the speaker)
Speaker
Handset
Headset
Steps
1. Press Menu.
2. Select Call History.
3. Select the log you want to view.
Highlight the entry.
1.
Press del.
2.
1. Highlight the entry.
2. Press edit.
3. Press save to save the changes, or cancel to abort the change.
1. Highlight the entry.
2. Press dial, or Off-Hook, or Turn on Speaker, or Turn on
Headset, or press a line key.
Highlight the entry.
1.
Modify the entry as needed.
2.
Press save to save the entry in the personal directory.
3.
Linksys IP Phone Administrator Guide
Using Call Features
3-31