Chapter 2
Getting Started
Front Panel and Side of Phone
Feature
Message waiting light
STATUS
FLASH
REDIAL
Back Panel
Port
Phone jack
Ethernet port
Power
SPA92x, SPA94x, and SPA962 Hardware Features
The SPA941, SPA942, and SPA962 provide LCD displays and other additional hardware features,
including the following:
•
•
•
•
•
•
•
•
•
•
•
•
•
Firmware Version 5.1
Four Illuminated Call Appearance Line Buttons with Tricolor LED's (six LED's on the SPA962)
LED Indicates Line State – Active, Idle, On-Hold, Unregistered
Line LED Configurable to 13 Different States (See
Dedicated Illuminated Buttons for:
Audio Mute On/Off
•
Headset On/Off
•
Speakerphone On/Off
•
Four Soft Key Buttons
Four Way Rocking Directional Knob for Menu Navigation
Voice Mail Message Waiting Indicator Light
Voice Mail Message Retrieval Button
Dedicated Hold Button
Settings Button for Access to Feature, Set-up, and Configuration Menus
Volume Control Rocking Up/Down Knob Controls Handset, Headset, Speaker, Ringer
Standard 12-Button Dialing Pad
High Quality Handset and Cradle
Function
On: you have a voicemail message.
Off: make a call. On: make a call; line is shared. Flashing: shared
line on hold. On red: line in use. Flashing red: local call on hold. On
orange: phone not registered.
Press to pickup a second incoming call, transfer a call, or setup a
three-way conference call.
Press the redial the last number called.
Function
Connect to the handset.
Connect to the SPA9000 through a local switch.
Connect to the 5-volt power supply.
"Line Key LED Pattern" section on page
Linksys IP Phone Administrator Guide
Linksys 900 Series IP Phones
5-31).
2-3