Network; Dchp; Current Ip Address - Linksys SPA921-NA Administrator's Manual

9 Network

When the display prompts for the Voice Mail Number, enter the number as if dialing the number. Erase
mistaken numbers, one at a time using the delChr soft key. Then press the save button to save the
number. After the number is saved, use the mailbox key on the right hand side of the phone (this is the
third button up from the Menu button) to dial the mailbox.

9 Network

To view or modify network parameters, press the Menu button and then press 9, or scroll down until
Network is highlighted and then press the select soft key. This menu displays the IP network
configuration settings.
The following options are available from the Network menu:
•
•
•
•
•
•
•
•
•
•
•
•
•
•

9.1 DCHP

Shortcut: Menu, 9, edit, y/n, ok
When DHCP is enabled, the phone obtains its IP address from a DHCP server.
To view DHCP status, press the Menu button and press 9, or scroll down to the Network option and
press the select soft key. The displays shows 1 DHCP Enable with a Yes or No to indicate the current
status.
To enable or disable DHCP, press the edit soft key and press the y/n soft key to toggle between Yes and
No. After making the selection, press the ok button and the display returns to the Network menu.

9.2 Current IP Address

Shortcut: Menu, 9, 2 save
To view the current IP address, press 2 on the Network menu, or scroll down until Current IP Address
is highlighted and press the select soft key. The Current IP Address is set in one of the following ways:
Linksys 900 Series IP Phone Administrator Guide
4-8
9.1 DHCP
9.2 Current IP Address
9.3 Host Name
9.4 Domain
9.5 Current Subnet Mask
9.6 Current Gateway
9.7 Enable Web Server
9.8 Non DHCP IP Address
9.9 Non DHCP Subnet Mask
9.10 Non DHCP Default Route
9.11 Non DHCP DNS 1
9.12 Non DHCP DNS 2
9.13 Non DHCP NTP Server 1
9.14 Non DHCP NTP Server 2
Chapter 4 LCD Command Reference Guide
Document Version 3.0