Chapter 2
Getting Started
Back Panel
Port
Phone jack
Ethernet ports
Power
SPA922
The SPA922 is similar to the SPA921, but provides Power over Ethernet (PoE) and an extra Ethernet
port for connecting another device to the LAN (see
ordered separately if you are not using a PoE switch.
Figure 2-3
SPA932
The SPA932 is a 32-button attendant console for the SPA962, providing 32 three-color (red, green, and
amber) programmable LEDS, with support for Broadsoft Busy Lamp Field and Asterisk Line
Monitoring (see
shown). It obtains power directly from the SPA962 and does not require a separate power supply. Two
SPA932 units can be attached to a single SPA962 to monitor a total of 64 separate lines.
Firmware Version 5.1
Function
Connects to the handset.
Connects to the SPA9000 through a local switch. The SPA922 has
two ports. Use the other port to connect to a PC or other LAN
device.
Connect to the 5-volt power supply.
SPA922
Figure
2-4). The SPA932 attaches to the SPA962 with the attachment arm provided (not
Linksys 900 Series IP Phones
Figure
2-3). The SPA100 power supply must be
Linksys IP Phone Administrator Guide
2-5