Configuring a Dial Plan
Dial Plan Timers
The dial plan functionality is regulated by the following configurable parameters:
•
•
•
Interdigit Long Timer
ParName
Default
The <Interdigit_Long_Timer> specifies the default maximum time (in seconds) allowed
between dialed digits, when no candidate digit sequence is as yet complete (see the discussion
of the Dial_Plan parameter for an explanation of candidate digit sequences).
Interdigit Short Timer
ParName
Default
The <Interdigit_Short_Timer> specifies the default maximum time (in seconds) allowed
between dialed digits, when at least one candidate digit sequence is complete as dialed (see the
following discussion of Dial_Plan parameters for an explanation of candidate digit sequences).
Dial Plans
ParName
Default
The Dial_Plan parameters contain the actual dial plan scripts for each line n, where n is a
number from 1 to 4.
Linksys 900 Series IP Phone Administrator Guide
3-26
Interdigit_Long_Timer
Interdigit_Short_Timer
Dial_Plan ([1] and [2])
Interdigit_Long_Timer
10
Interdigit_Short_Timer
3
Dial_Plan[n] for Each Line n
(*xx | [3469]11 | 0 | 00 | <:1408>[2-9]xxxxxx |
1[2-9]xx[2-9]xxxxxx | 011x. )
Chapter 3
Managing Linksys 900 Series IP Phones
Document Version 3.0