Led Indicators; Led Settings - Honeywell Voyager 1200g User Manual
Single-line laser bar code scanner
Hide thumbs
Also See for Voyager 1200g:
- User manual (288 pages) ,
- Quick start manual (13 pages) ,
- User manual (238 pages)
Table of Contents
Advertisement
To change the number of error beeps, scan the following bar code and then scan a digit (1-9) bar code and the
code on the
Programming Chart
LED Indicators
The green and red LEDs can be programmed to be On or Off and at different brightness levels to indicate various scanner
states. Use the following bar codes to program the LED indicators.
LED Settings
Default = Red LED On with Laser/Red LED Blinks when Battery is Low, Green LED On with Good Scan.
Red LED Off
Red LED On with Good Scan
Red LED On with Laser
Green LED On with Laser
4 - 4
inside the back cover of this manual. Default = 1.
Number of Error Beeps/LED Flashes
Save
Green LED Off
* Green LED On with Good Scan
* Red LED On with Laser/
Red LED Blinks when Battery is Low
Red LED On when CodeGate
Disabled
bar
Advertisement
Table of Contents
Troubleshooting
