Verifone ® Ruby Terminal Default Settings; Gilbarco ® Terminal Default Settings; Honeywell Bioptic Aux Port Configuration - Honeywell Voyager 1200g User Manual

®
Verifone Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone Ruby terminal. This bar code sets the baud rate to
1200 bps and the data format to 8 data bits, Mark parity, 1 stop bit and RTS/CTS no timeout. It also adds a line feed (LF) suffix
and programs the following prefixes for each symbology:
Note: If you are having unexpected results with this programming code, scan the
page 1-6 first, then scan the programming code above.
®
Gilbarco Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Gilbarco terminal. This bar code sets the baud rate to 2400
bps and the data format to 7 data bits, even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs the follow-
ing prefixes for each symbology:
Note: If you are having unexpected results with this programming code, scan the
page 1-6 first, then scan the programming code above.

Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration. This
bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit. Character RTS/CTS with tim-
eout and 232 ACK/NAK are also enabled.
Note: If you are having unexpected results with this programming code, scan the
page 1-6 first, then scan the programming code above.
Symbology Prefix
UPC-A A
UPC-E A
EAN-8 FF
EAN-13 F
Verifone Ruby Settings
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
Gilbarco Settings
Honeywell Bioptic Settings
Resetting the Custom Defaults
Resetting the Custom Defaults
Resetting the Custom Defaults
bar code on
bar code on
bar code on
2 - 7