Datalogic™ Magellan © Bioptic Aux Port Configuration; Ncr Bioptic Aux Port Configuration; Wincor Nixdorf Terminal Default Settings - Honeywell Voyager 1200g User Manual

Datalogic™ Magellan
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan bioptic scanner auxiliary port configura-
tion. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan the
page 1-6 first, then scan the programming code above.

NCR Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration. This bar
code sets the baud rate to 9600 bps and the data format to 7 data bits, Even parity, 1 stop bit and Message RTS/CTS with time-
out. The following prefixes are programmed for each symbology:
Note: If you are having unexpected results with this programming code, scan the
page 1-6 first, then scan the programming code above.

Wincor Nixdorf Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal. This bar code sets the baud rate
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan the
page 1-6 first, then scan the programming code above.
2 - 8
©
Bioptic Aux Port Configuration
Datalogic Magellan Bioptic Settings
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Resetting the Custom Defaults
Symbology Prefix
Code 39 B1
Interleaved 2 of 5 B2
All other bar B3
codes
Resetting the Custom Defaults
Resetting the Custom Defaults
bar code on
bar code on
bar code on