Scanner LED Sequences and Meaning
Note: Pressing the button on the scanner causes the LED to glow red until it communicates successfully with the base.
LED Indication
Normal Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking
Base LED Sequences and Meaning
The base contains a red LED that indicate the status of the unit and verifies its communication with the host system. The
base also has a green LED that indicates the scanner battery charge condition.
Red LED
Off
On continuously
Short blinks. Occurs while transferring data to/from the RF module
or the host port.
Green LED
Off
Slow flash, 1 second on, 1 second off
On continuously
Fast flash, 300 mSec on, 300 mSec off
Base Power Communication Indicator
To display the power indicator on the base, scan the Base Power Communication Indicator On bar code. To turn off the
power indicator, scan the Off bar code. Default = On.
* Base Power Communication
Indicator On
Beeper Indication
None
1 beep
Razz or error tone
2 beeps
Razz or error tone
Red LED - Host Communication
Green LED - Scanner Battery
Cause
Battery low
Successful communication or linking
Failed communication
Successful menu change
Unsuccessful menu change
Communication Condition
Power off, USB suspend
Power on, system idle
Receiving data
Charge Condition
Battery not detected or charge suspended
Pre-charge and charging
Charge complete
Charge Error
Base Power Communication
Indicator Off
3 - 5