Gs1 Databar Limited - Honeywell Voyager 1200g User Manual
Single-line laser bar code scanner
Hide thumbs
Also See for Voyager 1200g:
- User manual (288 pages) ,
- Quick start manual (13 pages) ,
- User manual (230 pages)
Table of Contents
Advertisement
= 0.
GS1 DataBar Limited
GS1 DataBar Limited On/Off
* On
GS1 DataBar Limited Redundancy
If you are encountering errors when reading GS1 DataBar Limited bar codes, you may want to adjust the redundancy
count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number
of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redun-
dancy, scan the GS1 DataBar Limited Redundancy bar code below, then scan a redundancy count between 0 and 10 on
the
Programming Chart
GS1 DataBar Omnidirectional
< Default All GS1 DataBar Limited Settings >
inside the back cover of this manual. Then scan the
GS1 DataBar Limited
Redundancy
Save
Redundancy
Off
bar code. Default = 0.
7 - 47
Advertisement
Table of Contents
Troubleshooting
